Long Beach garages

Annual Long Beach Garage Door Repair Guide

Long Beach garage door repair Is always easier when done consistently. A neglected garage door would be far more likely to cause issues. A well-maintained garage door should last for decades. If you have gotten a new garage door recently, learning about its maintenance is crucial. Otherwise, you’ll have no idea what to do. Luckily, we’ve got the perfect answer. Below, you’ll find a few of the most common issues, along with their solutions.

Long Beach Garage Door Repair: What to Expect During the First Year Following Installation

After your door is installed, the first year can be quite tumultuous. Since it is brand-new, it takes a little while for things to break in. Until that time, you can expect a few of the following symptoms. Don’t worry about them excessively. However, they should serve as crucial reminders about the importance of maintenance.


Excessive noise is often the result of the issues with the springs. Since those are responsible for cushioning the door, if they fail, things get loud. Of course, some noises should be expected. However, if it arises past a certain point, you should take a closer look at the springs. Typically, you’ll find a few pieces of strained metal that desperately need repairs.


As you are garage opens, how does it move? If things move smoothly, Nothing should bother you. On the other hand, if it tends to shake, you might want to have someone take a look. Often, shakiness is a sign of needed repairs.


If you open the garage partially, does it stay in place? If not, then you’ve got an issue with the garage door’s balance. A well-balanced garage door stays in place once it is opened. However, from time to time, the counterweights come out of place. Then, if the garage is partially opened, it’s no longer still. Instead, it’ll move in one direction or the other. Depending on where it goes, you’ll know how to adjust the balance.

Annual Maintenance Checklist

So, if you have a new garage door, how do you prevent those issues? Generally speaking, regular maintenance is the best cure for any problem. By maintaining things appropriately, you’ll provide the optimal working conditions.

Examine Each Piece of Hardware

Throughout your garage, screws and bolts hold everything together. Each time you open it, vibrations permeate the structure. Over time, those can cause the screws to loosen. Thus, each year, you should tighten them. Otherwise, they might come undone eventually.

To Ensure Stability, Inspect the Counterweights

So, you’ve got a garage door that refuses to stay in place. If that is the case, then you should adjust your counterweights. When they are unbalanced, your garage doesn’t have the necessary stability to stay in place. However, with a little diligent effort, you will reverse course. At that point, the garage should function as if it were brand-new again.

For Smooth Movement, Clean Rollers Are Key

As the garage door lifts off the ground, tiny rollers move it along the tracks. If these are clean, the garage should move without much shakiness. On the other hand, if you’ve got a few soiled rollers, it could cause quite a bit of disruption. Thus, with those rollers, a shaky garage door is all but unavoidable. Unless you clean them, prepare for a jerky garage.

If Friction Is an Issue, Apply Some Lube

Without sufficient lubrication, the garage motor must work even harder. To lift it off the ground, it must overcome that friction. However, if you would like to give it a hand, you can apply some lubrication yourself. That way, as it goes into motion, friction doesn’t slow things down. Thus, by lubricating the door, you’ll extend its lifespan. In effect, it lengthens the usefulness of the door.

Every Six Months, Sweep the Tracks

If you are not careful, dirty tracks could lead to problems. On the whole, filthy tracks are not the best place for your garage to go. Ideally, when it is moving, things are not in their path. Otherwise, the motor must provide even more power to push through them. If this continues for long enough, it may create an undue maintenance moment.

Since the crafty motor has been powering through so much, it has been worn down even more than usual. Consequently, the laborious machine must be replaced before you thought it would be necessary. Now, unless things are different, the new motor will suffer an identical fate.

To prevent such a travesty, take a brush to the tracks at least twice a year. By doing this, your spotless tracks are an ideal environment for the garage.

Properly Aligned Sensors Provide Enhanced Safety

At the end of the day, while the garage lowers down, sensors provide a bit of safety. If something disrupts the beam between them, then the garage will reverse course. Instead of lowering down all the way, it should begin to lift up. That way, if something gets underneath the garage while it is in motion, it is not in any danger. However, if the sensors have faulty alignment, things won’t play out this way. On the contrary, it might not be possible to close the garage door at all. If this is the case, you may need to schedule garage door service in Long Beach, CA.